Professional formula.
In every bottle.

carbody+insect combines two coordinated application areas: pre-cleaning the vehicle exterior and targeted removal of insect residues. The product loosens road dirt, insect remains, and other deposits even before the actual vehicle wash.

Dried insect residues and stubborn dirt cannot always be completely removed during normal vehicle washing. carbody+insect specifically loosens these contaminants, making subsequent cleaning easier.

Apply carbody+insect only on cooled surfaces. Spray the product evenly from bottom to top to ensure the surface is as evenly wetted as possible. Then rinse thoroughly with water according to the specified exposure time. Do not let the product dry and follow the instructions on the product label.

Depending on the degree of contamination, the intended exposure time is about one to three minutes. Then rinse the treated areas thoroughly. The product must not dry during the exposure time.

carbody+insect has a scent tailored to the application and avoids the often perceived unpleasant smell of classic insect removers. The product is intended exclusively for the designated areas of the vehicle exterior and must not be used in the vehicle interior.

wheel+gloss is suitable for approved steel, aluminum, alloy, and painted rim surfaces. The product must not be used on high-gloss polished rims or chrome rims. For special surfaces and unknown coatings, the approval of the rim manufacturer must be checked in advance.

"Gloss" stands for shine. wheel+gloss combines intensive rim cleaning with a gloss enhancement for a visibly well-maintained finish.

Yes. wheel+gloss is developed for high cleaning performance and dissolves brake dust, road film, and stubborn dirt on suitable rim surfaces. For particularly heavy soiling, cleaning can be supported with an appropriate rim brush.

Apply wheel+gloss only on cold rims. Spray the product evenly from bottom to top and let it work for about one to two minutes. For stubborn dirt, the rim can be treated with an appropriate brush. Then rinse the rim thoroughly with water or a high-pressure cleaner. Do not let the product dry.

wheel+gloss is a labeling-required cleaning product. Before use, the hazard and safety instructions on the product label must be observed. Use prescribed protective equipment, avoid skin and eye contact, and keep the product out of reach of children. It must not be used on hot rims or non-approved surfaces. The safety data sheet is available digitally.

glas+finish is suitable for vehicle windows, mirrors, piano lacquer, and suitable smooth surfaces. Depending on the approved application area, the product can be used both outside and on selected smooth surfaces in the interior. On sensitive or untreated materials, compatibility should first be tested in an inconspicuous area.

Yes. glas+finish is suitable for the final cleaning step after vehicle washing. It removes remaining residues and supports a streak-free, well-maintained finish on the designated smooth surfaces. Since the formula is alcohol-free, existing wax layers are not dissolved when used as intended.

No. glas+finish is intended for glass, mirrors, piano lacquer, and suitable smooth surfaces. The product is not a universal cleaner for all materials in the vehicle interior. For leather, faux leather, plastics, and suitable textile surfaces, interior+leather is intended.

glas+finish is formulated on an osmosis basis and is alcohol-free. This allows for low-residue application without smearing and supports a spot-free, streak-free drying result. The antistatic effect can additionally help reduce new dust deposits on treated surfaces.

glas+finish is primarily intended for glass cleaning and surface refinement of suitable smooth surfaces. When used as directed, it preserves existing wax layers but does not replace an independent paint sealant or permanent protective coating.

Yes. interior+leather combines deep cleaning of suitable interior surfaces with gentle care of leather and faux leather. This allows multiple typical care areas in the vehicle interior to be covered with one product.

interior+leather is suitable for leather, faux leather, suitable plastics, dashboards, and trims as well as suitable textile surfaces in the vehicle interior. The product should not be used on displays, glass, Alcantara, or microfiber materials.

First test material compatibility on a small, inconspicuous area. Apply the product sparingly according to the instructions on the label, work it in with a suitable cloth, and then completely wipe off any excess product residues.

Excess product should not remain on the treated surface. Therefore, completely wipe wet spots and product residues with a clean, suitable cloth.

interior+leather is subtly scented with almond blossom. The scent supports a fresh and well-maintained impression in the vehicle interior after application, without overshadowing the cleaning and care function.

Yes. The product cleans and cares for leather as well as faux leather and supports the maintenance of a well-kept appearance and material flexibility. Compatibility should be tested on an inconspicuous area before first use.